Scaffolds Application 1 May 2023

How do you build an RS TOWER 34 rolling tower?

The RS TOWER 34 mobile scaffold can be used by everyone. Module A is a perfect room scaffold, ideal for intensive DIYers or professionals. If you want to get higher, the RS TOWER 34 rolling tower is also highly suitable. The rolling tower can be built in different modules so you can work at your perfect height.

Module A

Fit the wheels and secure them with a locking pin. Place the frame in the upright position. Fold it out and fit the frame on the 3rd rung. Caution! Do not forget to lock the frame with the platform hook. Then turn the wheels outwards and lock the brakes. This creates the most stability. Finally, level the rolling tower.

afbeelding-68

Module B

Place a horizontal brace from the inside out above the wheels. The horizontal brace must be mounted from the inside out to create the most stability. Mount the collar tubes. Collar tubes require have some slack. Fit the guardrail frames and lock them. Fit the double guardrail braces from the inside out.

afbeelding-70-1

Move the platform to the 6th rung. Lock it with the platform hook. Mount the toe board holders and toe boards. This prevents your tools from falling off the platform. The rolling tower is now ready for use.

afbeelding-72-1

Module C

Start building module A. Place a horizontal brace from the inside outwards above the wheels to create the most stability. Mount the collar tubes. Collar tubes should have some slack. Then fit the assembly frames. Secure them with the locking pins. Fit the diagonal braces (on the 8th and 12th rung). Then fit the horizontal braces on the 10th rung.

afbeelding-74-1

Mount the triangular stabilisers. Secure the upright under the de 7th rung and the beam underneath the 2nd rung. Make sure the ends touch the ground. Move the platform to the 6th rung. Then fit a diagonal brace (attach it to the 1st and the 5th rung)

afbeelding-76-1

Fit the end frame. Fit the horizontal braces to the top rung of the end guardrail. Then fit the horizontal braces to the top rung of the other end guardrail. Push the end guardrail onto the assembly frame. By positioning the end guardrail in this way, you have already fitted a future hip guardrail. This guarantees your safety later when you are fitting and getting on to the next platform. Fit the platform. And then attach the double guardrail brace from the inside out. Move the horizontal brace from above the double guardrail brace underneath the horizontal brace as a knee and hip guardrail from the inside out. Finally, fit the toe board holders and toe boards. This prevents your tools from falling off the platform. The rolling tower is now ready for use.

afbeelding-78-1

Module D

Fit the wheels and secure them with the locking pins. Unfold the folding frame, fit the platform on the 2nd rung and lock it. Mount the collar tubes. Collar tubes require some slack. Fit the assembly frame and lock it. Fit the horizontal braces to the top rung of the assembly frame. Then push the assembly frame onto the folding frame of the rolling tower. By positioning the end guardrail in this way, you have already fitted a future hip guardrail. This guarantees your safety later when you are fitting and getting on to the next platform.

afbeelding-80-1

Place the diagonal braces (on the 4th and the 8th rungs). Mount the triangular stabilisers. Secure the upright under the de 7th rung and the beam underneath the 2nd rung. Make sure the ends touch the ground. Place a horizontal brace above the wheels. Secure it from the inside out to create the most stability. Then place the platform on the 9th rung.

afbeelding-82-1

Fit the assembly frame and lock it. Fit the horizontal braces to the top rung of the assembly frame. Then hook the horizontal braces to the top rung of the other assembly frame. Push the assembly frame onto the frame of the rolling tower. Place the diagonal braces (on the 2nd and the 6th rungs from the assembly frame). Fit the auxiliary platform (on the 7th sport from the platform). Fit the end guardrails and lock them. Pull the end guardrails upwards using a rope. Fit the knee and hip guardrails from the inside out.

afbeelding-84-1

Sit in the platform and move the horizontal braces. (4th rung from the platform). Put it back over the wheels. (Inside out). Then place the lower platform in the position where the horizontal braces were located. Lift the platform up using a rope. Move the auxiliary platform to the lowest rung. Then place the diagonal braces. (on the 6th and 10th rungs from the platform you are standing on).

afbeelding-86-1

Place a total of 40 kilograms of ballast on the platform (evenly distributed). 2x ballast (item number 415270, 20 kilograms) or equivalent alternative. This creates balance for the rolling scaffold. Climb back to the top. Mount the toe board holders and toe boards. This prevents your tools from falling off the platform. The rolling tower is now ready for use.

afbeelding-88-1
nieuwsbrief-inschrijven-9

Would you like to receive more hints and tips?

Subscribe now to the Altrex newsletter to stay up to date on the latest developments and innovations, and you'll be first to receive the latest news.